Task 1—Create ISAKMP Policy for Remote VPN Client Access
Task 3—Define Group Policy for Mode Configuration Push
Task 3 contains the following steps:
Step 1—Set the tunnel group type
Step 2—Configure the IKE pre-shared key.
Step 3—Specify the local IP address pool.
Step 4—Configure the group policy type.
Step 5—Enter the group policy attributes submode
Step 6—Specify the DNS servers.
Step 7—Specify the WINS servers.
Step 8—Specify the DNS domain.
Step 9—Specify idle timeout.
Step 9—Specify Idle Time
Step 7—Specify WINS Servers
Task 4 :- Create Transform Set
Task 5—Create Dynamic Crypto Map
Step 8—Specify DNS Domain
Task 6—Assign Dynamic Crypto Map to Static Crypto Map
Step 1—Set the tunnel group type
Step 2—Configure the IKE pre-shared key.
Step 3—Specify the local IP address pool.
Step 4—Configure the group policy type.
Step 5—Enter the group policy attributes submode
Step 6—Specify the DNS servers.
Step 7—Specify the WINS servers.
Step 8—Specify the DNS domain.
Step 9—Specify idle timeout.
Step 9—Specify Idle Time
Step 7—Specify WINS Servers
Task 4 :- Create Transform Set
Task 5—Create Dynamic Crypto Map
Step 8—Specify DNS Domain
Task 6—Assign Dynamic Crypto Map to Static Crypto Map
Task 8 contains the following steps:
Step 1—Enable AAA login authentication.
Step 2—Define AAA server IP address and encryption key.
Step 3—Enable IKE XAUTH for the tunnel group.
Step 1—Enable AAA login authentication.
Step 2—Define AAA server IP address and encryption key.
Step 3—Enable IKE XAUTH for the tunnel group.
Task 9: Configure NAT and NAT 0
No comments:
Post a Comment